Funny Carrot Amigurumi Crochet Pattern

Bring some fun to your crochet collection with this adorable carrot amigurumi pattern! This cute little carrot features playful details, expressive eyes, and leafy green hair that make it full of personality. The pattern is easy to follow and suitable for beginners, with step-by-step instructions to help you create your own charming veggie friend. Perfect as a handmade gift, nursery decoration, or a fun addition to your amigurumi collection!

THE REQUIRED MATERIALS:

1.Yarn

Gazzal Baby Cotton (50g – 165 m, 60% cotton, 40% acrylic), color 3419

orange – 1 skein for the body and arms (Alize Baby Best color 408 or Alize

superlana klasik color 336 - as an alternative);

YarnArt Ideal (50g – 170 m, 100% cotton), color 235 green – 1 skein for the

leaves and legs;

YarnArt Iris (25 g – 150 m, 100% mercerized cotton), white – for the whites

of the eyes, black for embroidering the eyebrows and mouth;

2. 1.5 mm crochet hook.

3. Stuffing material (fiberfill/polyester);

4. Stitch marker, tapestry needle, scissors, thin wire (0.4 mm) for the leaves,

thick wire (2 mm) for the arms and legs, and double adhesive tape;

5. Superglue;

6. Safety eyes D=8 мм.

CROCHET ABBREVIATIONS :

CH = chain

Dec = decrease

Inc = increase

Sc = single crochet

DC = double crochet

HDC = half double crochet

Sl ST = slip stitch

(…)*8 – repeat as required

(18) – the number of stitches in the round.

Before You Start

This crochet pattern is suitable for intermediate skill levels. The carrot body is crocheted in a continuous spiral as one piece, while the arms, legs, and leafy top are made separately and sewn on later.

The finished doll measures approximately 15 cm tall without the leaves.

The pattern includes detailed instructions and helpful photos to guide you through each step and help you achieve a beautiful final result.

Now, let’s begin the fun of crocheting! 🌿

🥕

Eyes (whites) – make 2

Crochet with white Iris yarn and a 1.5 mm crochet hook.

Rnd 1: 6 into MR (6)

Rnd 2: 6 inc (12)

Rnds 3-4: 12 sc (12) – 2 rounds

Rnd 5: 6 dec (6)

Insert the eyes between the loops in the 3rd round, as guided in the photos

below.

Break yarn, leaving a long tail for sewing.

Crochet the second eye similarly.

CARROT

The doll is crocheted as one piece with orange yarn and a 1.5 mm crochet hook.

The arms, legs, and leaves are crocheted separately with green and attached to

the body.

Body

Crochet the body from the top to the bottom in continuous circles with

orange yarn and a 1.5 mm crochet hook.

Rnd 1: 6 sc into MR (6)

Rnd 2: 6 inc (12)

Rnd 3: (1 sc, inc)*6 (18)

Rnd 4: (2 sc, inc)*6 (24)

Rnd 5: (3 sc, inc)*6 (30)

Rnd 6: (4 sc, inc)*6 (36)

Rnd 7: (5 sc, inc)*6 (42)

Rnd 8: (6 sc, inc)*6 (48)

Rnd 9: (7 sc, inc)*6 (54)

Rnd 10: (8 sc, inc)*6 (60)

Put the part on the plastic cover and trace around it. Cut the template out and

make a small hole in the center of the template, as shown in the photo below.

Put the template aside and complete crocheting.

Rnd 11: 60 sc through the back loops (60)

Rnd 12: (18 sc, 1 dec)*3 (57)

Rnds 13-14: 57 sc (57) – 2 rounds

Rnd 15: (17 sc, 1 dec)*3 (54)

Rnds 16-17: 54 sc (54) – 2 rounds

Rnd 18: (16 sc, 1 dec)*3 (51)

Rnds 19-20: 51 sc (51) – 2 rounds

Rnd 21: (15 sc, 1 dec)*3 (48)

Insert the plastic template inside and

continue crocheting.

Rnds 22-23: 48 sc (48) – 2 rounds

Rnd 24: (14 sc, 1 dec)*3 (45)

Rnds 25-26: 45 sc (45) – 2 rounds

Rnd 27: (13 sc, 1уб)*3 (42)

Rnds 28-29: 42 sc (42) – 2 rounds

Rnd 30: (12 sc, 1 dec)*3 (39)

At this stage, insert the safety eyes with the whites between rounds 22 and 23.

Secure the washers from the inside. The distance between the eye stems is 4

stitches. I attach the eyes with the whites to the ready toy.

Rnd 31-32: 39 sc (39) – 2 rounds

Rnd 33: (11 sc, 1 dec)*3 (36)

Rnds 34-35: 36 sc (36) – 2 rounds

Rnd 36: (10 sc, 1 dec)*3 (33)

Stuff with fiberfill firmly.

Rnds 37-38: 33 sc (33) – 2 rounds

Rnd 39: (9 sc, 1 dec)*3 (30)

Rnds 40-41: 30 sc (30) – 2 rounds

Rnd 42: (8 sc, 1 dec)*3 (27)

Rnds 43-44: 27 sc (27) – 2 rounds

Rnd 45: (7 sc, 1 dec)*3 (24)

Do not forget to stuff.

Rnds 46-47: 24 sc (24) – 2 rounds

Rnd 48: (6 sc, 1 dec)*3 (21)

Rnds 49-50: 21 sc (21) – 2 rounds

Rnd 51: (5 sc, 1 dec)*3 (18)

Rnds 52-53: 18 sc (18) – 2 rounds

Complete stuffing.

Rnd 54: (1 sc, 1 dec)*6 (12)

Rnd 55: 6 dec (6)

Tighten the hole. Fasten off, break yarn, and hide the tail inside.

Nose

Crochet with orange color and a 1.5 mm crochet hook.

Chain 4 and start crocheting in the second chain from the hook.

Rnd 1: 2 sc, 3 sc in 1 stitch, and continue crocheting on the other side of the chain foundation 1 sc, 1 inc (8)

Rnd 2: 1 inc, 1 sc, 1 inc, 1 sc, 1 inc, 1 sc, 1

sc (10)

Rnd 3: 4 sc, 1 inc, 4 sc, 1 inc (12)

Rnd 4: 12 sc (12)

Break yarn, leaving a long tail for sewing.

Put the nose aside and pin it under the

eyes.

Arms (make 2)

Crochet with orange color and a 1.5 mm crochet hook.
Rnd 1: 6 into MR(6)
Continue crocheting around.
Rnd 2: (sc, inc)*3 (9)
Rnd 4: (3 sc, inc)*3 (15)
Rnd 3: (2 sc, inc)*3 (12)

Rnds 5-6: 15 sc (15)

Rnd 7: The left arm: Puff st (4 DC together cluster), 4 sl sts, 10 sc (15)

The right arm: 3 sc, 4 sl sts, Puff st (4 DC together cluster), 7 sc (15)

Rnd 8: (3 sc, dec)*3 (12)

Rnd 9: (2 sc, dec)*3 (9)

Rnd 10: (sc, dec)*3 (6)

Break yarn, leaving a tail 50 cm (19.6 inches) long.

Make the wireframe for the arms:

1. Cut two pieces of wire (d=2mm), each measuring 10 cm (3.9 inches) in length. There are 4 pieces of wire in the photo (2 for the arms and 2 for the legs).
2. Wrap a double-sided adhesive tape around the wireframe wire.
3. Insert the wireframe into the arm and wrap the yarn tail around the wire for about 5 cm in height;
5.Secure the tail around the double-sided tape in the middle of the wire;

Make the second arm similarly.

Attach the arms to the body.
Mark the positions for the arms on the body in round 30. Use the sharp tip of scissors to carefully widen the holes between the loops, being cautious not to cut the garment. Apply some glue to the tip of the wireframe and insert it into the holes on the sides of the body. Secure the wireframe with glue inside, ensuring that any yarn tails are tucked away inside the body.
Attach the second arm similarly.

Legs (make 2)

Crochet with green color and a 1.5 mm
crochet hook.
Rnd 1: chain 5 and start crocheting in the 2nd chain from hook: 3 sc, 3 sc in the last chain foundation, and continue crocheting on the other side of the chain foundation 2 sc, inc (10)

Continue crocheting around.
Rnd 2: inc, 3 sc, 2 inc, 3 sc, inc (14)
Rnd 3: sc, inc, 4 sc, inc, sc, inc, 4 sc, inc (18)
Rnd 4: (2 sc, inc)*6 (24)
Rnds 5-12: 24 sc (8 rounds)
Rnd 13: (2 sc, 1 dec)*6 (18)
Rnd 14: (1 sc, 1 dec)*6 (12)
Rnd 15: 6 dec (6)
Break the yarn, secure it, and hide the tail inside.

Crochet the second foot similarly.

Make the wireframe for the legs:
Prepare two wireframes for the legs by cutting two pieces of wire, each measuring 10 cm (3.9 inches) long. Bend the end of the wire as shown in the photo below.The bent end of the wire matches the length of the foot.

Wrap double-sided tape around the wireframe from the beginning to the middle. Wrap a green scrap yarn around the wireframe, as shown in the photo below.
Carefully widen the holes between the loops using the sharp tip of scissors. The hole is in the middle of the top of the foot between rounds 11 and 12. Apply some glue to the tip of the wireframe and insert it into the foot through the hole. Secure the wireframe with glue inside. Make sure to tuck away any yarn tails inside the body.
Attach the second leg similarly.

Next, mark the points for the legs on the sides of the body in round 48.

Carefully widen the holes between the loops using the sharp tip of scissors while

ensuring not to cut the garment.

Apply glue to the tip of the wireframe and insert it into the holes on the sides of

the body at round 48. Secure the wireframe with glue inside and ensure that

any yarn tails are tucked inside the body.

Attach the second leg similarly.

Cut a scrap of green yarn. Chain 12, cut yarn, leaving a long tail for sewing. Sew

the chain around the wireframe on the foot with the yarn tail. Hide the tail

inside.

Leaves (branches)

Small leaves (make 2)

Crochet with green color and a 1.5 mm crochet hook.

Crochet the leaf as follows:

Rnd 1: chain 16 and start crocheting in the

second chain from hook: 1 sc, 1 HDC, 3 DC,

1 HDC, 1 sc, 2 sl sts

Rnds 2-6: chain 12 and start crocheting in

the second chain from hook: 1 sc, 1 HDC, 3

DC, 1 HDC, 1 sc, 2 sl sts

Continue crocheting on the other side downward.

Rnds 7-11: 2 sl sts to the chain, chain 11, and start crocheting in the second chain from the hook: 1 sc, 1 HDC, 3 DC, 1 HDC, 1 sc, 3 sl sts

At the end, make 6 sl sts to the chain.

Break yarn, leaving a tail 20 cm (7.8 inches) for sewing.

Big leaf (make 1)

Crochet around with green color and a 1.5 mm crochet hook.

Crochet the branch similarly, but make 2 leaves more.

Rnd 1: chain 16 and start crocheting in the second chain from hook: 1 sc, 1 HDC,

3 DC, 1 HDC, 1 sc, 2 sl sts

Rnds 2-8: chain 12 and start crocheting in the second chain from hook: 1 sc, 1

HDC, 3 DC, 1 HDC, 1 sc, 2 sl sts

Continue crocheting on the other side downward.

Rnds 9-15: 2 sl sts to the chain, chain 11, and start crocheting in the second

chain from the hook: 1 sc, 1 HDC, 3 DC, 1 HDC, 1 sc, 3 sl sts

Finally, make 6 sl sts to the chain.

Break yarn, leaving a tail 20 cm (7.8 inches) for sewing.

Make the wireframe for the leaves:
Cut 2 pieces of thin wire (0.4 mm) 15 cm (5.9 inches) and 1 piece 20 cm (7.8 inches) long.
Thread the needle with green thread (which we used for crocheting the leaves).
Insert the needle into the top of the branch on the wrong side. Tie the tail into a knot.
Put the wireframe along the branch and start sewing it.
Once we reached the bottom of the branch, secure the thread, but do not cut it.

Once the three branches are ready, insert the wireframes into the center of the top of the carrot (where we made the hole in the plastic template). Position one long branch at the back and two smaller branches at the front.

Sew the branches to the top of the carrot, wrapping the thread around them to secure them in place. Make sure to hide any loose thread tails inside the carrot. Finally, straighten the leaves.

Assembly

Embroider the stripes on the body of the carrot. To do this, cut a scrap of black

thread (40 cm/15.7 inches) and thread the needle. Embroider 2 thin stripes on

the carrot randomly.

Install the eyes if you haven’t done it

before. Using the sharp tip of scissors,

widen the holes between the loops on the

body carefully—be cautious not to cut the

garment.

Insert the eye stems with the whites into the

holes between rounds 22 and 23 of the body

and, if necessary, glue the stems. Ensure

that the distance between the eye stems is

4 stitches apart.

Sew around the whites of the eyes to the

body using the white yarn tail. Once done,

fasten off and hide the tail inside the body.

Sew the nose under the eyes between

rounds 25 and 26 of the body,

Embroider the eyebrows above the eyes.

Make 1 stitch at an angle with a thin black

thread, as shown in the photo.

Draw the thread out in the middle under the nose and make 1 stitch at an angle

(mouth).

Fasten off and hide all yarn tails.

Thank you for crocheting this adorable carrot design! 🥕✨

We hope you enjoyed every step of creating this cheerful little character and had fun bringing it to life with your own handmade touch.

With its playful expression and cute details, this carrot amigurumi makes a lovely gift, decoration, or sweet addition to any crochet collection. Keep practicing, stay creative, and most importantly — enjoy the wonderful world of amigurumi crochet! 💚