Cute Giraffe Amigurumi Crochet Pattern (Boy & Girl Doll)


Create an adorable pair of giraffe dolls with this cute amigurumi crochet pattern. Featuring charming outfits and sweet handmade details, these giraffes make wonderful gifts for children, nursery decorations, or anyone who loves crochet toys. If you enjoy creating unique amigurumi projects, this pattern is a delightful addition to your collection.

Cute Giraffe Amigurumi Crochet Pattern PDF (Boy & Girl Doll)

Abbrevi ations:

1. sc single crochet;
2. dc double crochet;
3. hdc Half double crochet;
4. inc increase (2 sc in the next stitch);
5. dec decrease (single crochet 2 stitches together);
6. ch chain stitch;
7. sl st-slip stitch;
8. mr magic ring.

Boy Giraffe Yarn Colors

Yarn Art Jeans (50 g/160 m) - №35 
(body); 
№71 – for spots, horns, arms and legs.
I use it to embroider branches on 
leaves;
№05 – inner part of the ears, 
overalls;
№53 – eyelashes, eyebrows;
№73 – cheeks;
№01 – muzzle, eyes;
№69 and №11 – for leaves.

Materials for the Girl Giraffe

Yarn Art Jeans (50 g/160 m) - №67 
(for the body);
№87 – for spots, horns, arms 
and legs.
№23 - overall;
№53 – eyelashes, eyebrows;
№73 – cheeks and inner part of the 
ears;
№01 – muzzle, eyes, flower;
№35 – the inner part of the flower. 

 Other Materials & Tools

2. Crochet hook No. 1.75 - No. 2
3. 2 buttons - 20 mm in diameter;
4. A needle for sewing the parts of the toy and a long needle for tightening 
the muzzle (I take a needle that is used for stitching documents);
5. 12 mm safety eyes;
6. Filling for the toy (I have holofiber).
7. Scissors.

Before You Start

Skill Level: Intermediate
Finished Size: Approximately 25–26 cm (10 inches) tall.
Note: The finished size may vary depending on the yarn weight, crochet hook size, and your individual tension

Head 

1) 6 sc in MR
2) 6 inc (12)
3) (1 sc, inc) x 6 (18)
4) (2 sc, inc) x 6 (24)
5) (3 sc, inc) x 6 (30)
6) (4 sc, inc) x 6 (36)
7) (5 sc, inc) x 6 (42)
8) (6 sc, inc) x 6 (48)
9) 48 sc (48)
10) (7 sc, inc) x 6 (54)
11) 54 sc (54)
12) (17 sc, inc) x 3 (57)
13) (18 sc, inc) x 3 (60)
14-23) 60 sc – 10 rows
Insert the safety eyes between Rows 18 and 19 of the head. The distance 
between the “legs” of the eyes is 11 sc.
24) (8 sc, dec) x 6 (54)
25) (7 sc, dec) x 6 (48)
26) (6 sc, dec) x 6 (42)
27) (5 sc, dec) x 6 (36)
We begin to fill our heads.
28) (4 sc, dec) x 6 (30)
29) (3 sc, dec) x 6 (24)
30) (6 sc, dec) x 3 (21)
Cut the thread, hide the end. . Stuff the head tightly with fiberfill in the process 
o f making it.

Head

Head

Body

1) 6 sc in MR
2) 6 inc (12)
3) (1 sc, inc) x 6 (18)
4) (2 sc, inc) x 6 (24)
5) (3 sc, inc) x 6 (30)
6) (4 sc, inc) x 6 (36)
7) (5 sc, inc) x 6 (42)
8) (6 sc, inc) x 6 (48)
9) (7 sc, inc) x 6 (54)
10) (8 sc, inc) x 6 (60)
11-15) 60 sc – 5 rows
16) (8 sc, dec) x 6 (54)
17-18) 54 sc – 2 rows
19) (7 sc, dec) x 6 (48)
20-21) 48 sc (2 rows)
22) (6 sc, dec) x 6 (42)
23-24) 42 sc – 2 rows
25) (5 sc, dec) x 6 (36)
26) 36 sc
Let's start filling the body. We stuff the body tightly, just like the head.
27) (4 sc, dec) x 6 (30)
28) 30 sc
29) (3 sc, dec) x 6 (24)
30) 24 sc
31) (6 sc, dec) x 3, slst (21)
Cut the thread, leave a long tail to sew the head to the body.

Body

Body

Arms (2 details)

We return to the 4th row. Insert the hook into the front loops (as indicated in 
the photo), make 1 ch, continue to knit the front loops, 1 sc in each loop. 
Total 15 sc. We make a slst, cut the thread and use a needle to hide it inside 
the arm.
1) 6 sc in MR
2) 6 inc (12)
3)(3 sc, inc) x 3 (15)
4) 15 sc BLO (15)
5) 15 sc
6) dec, 13 sc, change the thread to yarn of a different color (see photo) (14)
With yellow:
7) 14 sc
8) dec, 12 sc (13)
9) 13 sc
10) (dec, 11 sc) (12)
11-16) 12 sc – 6 rows. work additionally 2 sc (shift stitches).
Fold the arm into two halves and work 6 sc through the both sides. Fill the arms 
tightly to the middle.

Arms

Arms

Arms

Arms

Arms

Legs (make 2)

1) 6 sc in MR
) 6 inc (12)
3) (1 sc, inc) x 6 (18)
4) (5 sc, inc) x 3 (21)
5) 21 sc behind the back wall of the loop (21)
6) 21 sc
7) (dec, 19 sc) (20)
 Change yarn colour to yellow:
8) 20 sc
9) (dec, 8 sc) x 2 (18)
10) 18 sc
11) (dec, 7 sc) x 2 (16)
12) 16 sc
13) (dec, 6 sc) x 2 (14)
14-20) 14 sc – 7 rows and work additionally 3 more sc (shifted stitches). 
This is necessary so that the place where the thread is changed ends up 
behind the leg.
Fold the arm into two halves and work 7 sc through the both sides.
We fill the legs tightly up to the 16th row.
We return to row 5. Insert the hook into the front half-loops (as indicated in the
 photo), make 1 ch, continue to knit the half-loops, 1 sc in each half-loop. 
Total 21 sc. 
We make a slst, cut the thread and use a needle to hide the ends inside.

Legs

Legs

Horns (make 2)

1) 6 sc in MR
2) 6 inc (12)
3) (3 sc, inc) x 3 (15)
4) 15 sc
5) (3 sc, dec) x 3 (12)
6) 5 dec, 2 sc, change the thread to a different color yarn
7-9) 7 sc – 3 rows.
Don't stuff the horns. 
Make a slst, cut the thread, leave the tail for sewing.

Horns

Ears (consist of two parts)

Inner ear part (2 pieces)

1) 6 sc in mr;
2) 6 inc (12), slst
3) (1 sc, inc) x 6 (18), slst. Cut the thread.

Inner ear part

Outer part of the ear:

1) 6 sc in mr;
2) 6 inc (12)
3) (1 sc, inc) x 6 (18)
We don’t cut the thread, we put the inner and outer parts together and continue 
knitting both parts:
4) (2 sc, inc) x 2, 2 sc, 3 dc in one loop, 2 sc, (2 sc, inc) x 2, 1 sc (24), slst.

Outer part of the ear

Outer part of the ear

Make the second ear in the same way. 
Cut the thread, fold the ear into two halves and sew it with a needle making 2-3
stitches through the both sides. Then pull this thread into the center of the ear with
a needle. This way it will be more convenient to sew the ear to the head.

Ears

Ears

Ears

Ears

Ears

Ears

Muzzle

1) 7 ch 
2) Work along the chain, starting from the 2nd loop from the hook: 
inc, 4 sc, 3 sc in one loop, 5 sc (14)
3) 2 inc, 4 inc, 3 inc, 4 inc, inc (20)
4) (4 sc, inc) x 4 (24)
5) (5 sc, inc) x 4 (28)
6) 28 sc, slst. Cut the thread and leave enough for sewing.

Muzzle

How to assemble the toy

1. Sew the head to the body.

I sew them together stitch into stitch (21 stitches).
Important! Stuff the area of the neck tightly in the process of sewing.

assemble the toy

assemble the toy

2. Tightening of the eyes

The tightening of the eyes is the same for all of my toys. So, if you have 
my crochet patterns, make the same actions as it is explained there. 
Consists of two stages: 
Tighten the eyes down. For tightening the eyes, I take a long needle.  
Insert the long thread of the body colour into this needle. 
1. Insert the needle into the middle of the neck, draw it out at the center of 
the outer part of the first eye;
2. Insert the needle into the center of the inner part of this eye, draw it out at the middle of the neck where it was inserted at the start;
3. There will be a loop, tighten it;
4. Insert the needle with the same thread into the middle of the neck slightly to the right (1sc) from the point where it was first inserted. Draw it out at the centre of the outer part of the second eye;
5. Insert the needle into the center of the inner part of the second eye, draw it 
out at the neck again. There will be a loop, tighten it; 
6. Pull one end of the thread, then pull the other one. If the eyes are not symmetrical fix them by hand.

assemble the toy

assemble the toy

You can leave the tightening at this stage. But I prefer to make the 2nd 
stage as well, I tighten the eyes to the center. Keep working with the same thread: 
1. Insert the needle into the middle of the neck, draw it out at the center of
 the upper part of the first eye.
2. Insert the needle into the center of the lower part of this eye, draw it out 
at the middle of the neck again. There will be a loop, tighten it from the muzzle’s side. 
3. Make the same actions with the second eye. 
Thus, the eyes are set deep and beautiful cheeks are formed. 
Tie the ends of the threads that are left after the tightening of the eyes together, cut 
them and hide them into the head.

assemble the toy

3. Sew the muzzle to the head at the level of Rows 18-24.
Stuff with fiberfill in the process.
 
Sew the muzzle

4. We embroider the nostrils at the 4th row of the head. To do this, we make a stitch 
on one side, tighten the needle, insert the needle symmetrically and make a stitch on 
the other side. Again we return the needle and thread to the place of the first stitch, 
make a second stitch there (on top of the first), and do the same thing symmetrically. 
So 3 stitches on each side.

assemble the toy

5. We embroider the whites of the eyes, eyelashes, eyebrows at the 13th row of the head, cheeks between the 20th and 21st rows of the head.

assemble the toy

6. Sew the horns to the head at the level of Row4-5

Sew the horns

7. Sew on the ears at the 9th and 10th rows of the head. If you are knitting a girl, 
then sew the ears at an angle at the 13th row level.

Sew on the ears

8. Sew the spots on. To do this, make 4 spots: 8 sc in mr. 
If you are knitting a girl, you first need to sew the hair band in two places: 
where the knot is and at the back in the middle of the neck. Then you sew
the spots on. I make three spots for the girl.
 
Sew the spots

9. Sew the arms to the body between Rows 30 and 31;

Sew the arms

10. Sew the legs to the body between Rows 11 and 12.

Sew the legs

Overalls  

1. Cast on 66 ch. Then work back and forth rows starting each row with 1 ch: 
2-12) 11 rows of 66 sc each;
 
Overalls

We do not cut the thread, go to the side edge and knit this edge with a sc.
Cut the thread and hide it.

Overalls

Overalls

Next, you need to try it on a giraffe. We arrange the knitting on the wrap so that 
the last row of the fabric ends at the place where the legs are sewn.
On top should be the edge of the fabric that we tied with a sc. 
The fabric should fit snugly on the tummy.

Overalls

Insert the hook into the first loop where the overlap begins (see photo).

Overalls

We make 2 sc behind the back loop, then continue to knit only on one side 
(the back). At the beginning of 2 knitted sc we put a marker, this will be the 
beginning of the row. This is how we knit 9 rows in a circle. Last row not.
Make 3 sc (this is necessary in order to shift the wrap to the side when we form 
the trouser legs).

Overalls

Attention! It took me 6 sc, that is, 60 left, so I knit 9 rows of 60 sc. 
It may take you more loops to overlap
 (your giraffe may be less pot-bellied) or fewer loops (if the tummy is more stuffed with filling). Ultimately, when you knit these 9 rows in the round, you should have an EVEN number of stitches (equal for each leg), so if you have an odd number of stitches, then make one decrease or one increase as you knit.

Overalls

Next, we form the pant legs (30 sts for each). Insert the hook into the 30th stitch 
and knit 4 rows in a circle, slst. Don't cut the thread! 
We make a turn on the pant leg and use this thread to secure it from the inside 
of the pant leg so that it does not unravel.
We knit the second leg in a similar way.

Overalls

Sew two buttons where the wrap is. I sew all the way through.

Sew two buttons

Overalls

Straps (2 pieces)

Ch 34 + 1 ch. From the 2nd chain from the hook: 34 sc.
I sew the straps directly after putting the overalls on the toy, cross-wise at the 
back, and hide the ends inside. In front - one strap with the tip outward, the 
second - under the buttons, with the tip inward.

Straps

Leaves (2 pieces)

1. 6 sc in mr;
2. (1 sc, inc) x 3 (9)
3. (2 sc, inc) x 3 (12)
4. (3sc, inc) x 3 (15)
5. (4 sc, inc) x 3 (18)
6. 18 sc
7. (4 sc, dec) x 3 (15)
8. (3 sc, dec) x 3 (12)
Fold and knit along both sides. Leave the end tail for sewing.
Next, we embroider the branch and sew the leaf on both sides. Cut the thread, 
leaving a long tail. We make the second leaf similarly.
 
Leaves

 Next, there are two options for strings:
 
1. We tie the leaves together. Make a loop around the hook from the thread that 
remains (as shown in the photo below) and make 24 ch. Cut the thread and 
make a knot. The second leaf is similar.
 
2. Hide the end of the remaining thread with a needle inside the leaf.
Separately, we make two chains of 24 ch and sew them to the leaves. Make 
knots at the end. Tie the leaves together.

Leaves

Leaves

Leaves

Leaves

Leaves

Hair Band 

Ch80, start in the 2nd ch from the hook, 79 sc. I stretch it a little with my hands,  
and it on my head with two knots and fasten it in two places (at the site of the 
knot and at the back of the neck).

Hair Band

Flower 

Using yellow yarn we knit 6 sc in mr, change the yarn to white.
 We continue making:
Ch 2, (3 dc in one stitch, slst in the same stitsh) - 6 times.
If you want a more convex center, then make 6 sc in mr again with yellow 
yarn and sew it into the middle of the flower. We make ties the same way as we 
did on the leaves.

Flower

Cute Giraffe Amigurumi Crochet Pattern (Boy & Girl Doll)

Thank you for visiting our blog! We hope you enjoy making these adorable giraffe amigurumi dolls. If you found this pattern helpful, feel free to share it with your fellow crochet lovers. Don't forget to bookmark our website and check back often—we regularly add new free crochet patterns, amigurumi designs, and creative projects to inspire your next handmade creation. Happy crocheting!
 
  


  

About the author

Hadeel Alnatour
Hi! I'm Hadeel, a crochet enthusiast with a passion for amigurumi and handmade creations. I created this blog to collect and share crochet patterns in one organized place, making it easier for crocheters to find inspiring projects. Here you'…

Post a Comment